Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION (continued)
3
Place the back plate of the fixture
body (A) onto the fixture mounting
screws (FF) and secure it into
place by using the lock nuts (AA)
provided.
Caulk the upper 2/3
plate on the fixture body (A).
Leave the bottom 1/3
for drainage of any water that may
leak into the enclosure.
OPERATION
Turn on power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.
CARE & CLEANING
E
M
XTERIOR
AINTENANCE
Use a dry or slightly dampened
clean cloth and wipe the surface
of the fixture.
I
M
NTERIOR
AINTENANCE
Disconnect power to the fixture by turning off the circuit breaker or by
removing the fuse at the fuse box.
Use a dry or slightly dampened clean cloth to wipe the interior surface of the
fixture.
rds
of the back
rd
un-caulked
FF
AA
NOTE: Do not use any cleaners
with chemicals, solvents, or harsh
abrasives. Use only a dry soft
cloth to dust or wipe carefully.
5
A
Publicidad
