KERO 260 Manual Del Usuario página 61

Adjusting the height of the flamme
Combustion can be optimized within a range of 10% by adjusting the height of the flame
(cf hereafter).
Bad combustion
Good combustion Bad combustion
Insufficient heating of the
upper part of the system.
Check the qua lity of the
fuel
Flame is dangerously
high
If despite the regulation, the flame is too high or if the heater unevenly (its colour is not
uniform), take the lever on the combustion cylinder and shake it gently once or twice. If
the problem subsists, stop the heater and contact your retailer.
If you continue using your heater with bad combustion, soot and/or CO emission will
result.
61