Goodwe GMK110 Manual De Instrucciones página 3

Quick Installation Guide V1.1-2023-12-15
01 Safety Precautions
General Disclaimer
• The information in this quick installation guide is subject to change due to product
updates or other reasons. All descriptions here are for guidance only.
• Before installations, read through the quick installation guide.
• All operations should be performed by trained and knowledgeable technicians who are
familiar with local standards and safety regulations.
• Check the deliverables for correct model, complete contents, and intact appearance.
Contact the manufacturer if any damage is found or any component is missing.
• Strictly follow the installation, operation, and configuration instructions in this guide
and user manual. The manufacturer shall not be liable for equipment damage or
personal injury if you do not follow the instructions. For more warranty details, please
visit https://en.goodwe.com/warranty.
Safety Disclaimer
WARINING
• Make sure that the device is powered off before any operations.
• Ensure the cables are connected tightly, securely, and correctly. Inappropriate wiring may
cause poor contact or damage the device.
• No operations while the meter is powered on. Otherwise, it will cause personal injury or
damage to the meter. Additional circuit breakers are recommended on the voltage input
side of the meter.
• If the voltage of the power grid fluctuates, resulting in the voltage to exceed 265V,
in this case, long-term overvoltage operation may cause damage to the meter. It is
recommended to add a fuse with a rated current of 0.5A on the voltage input side of the
meter to protect it.
• In areas at risk of lightning, if the device cable exceeds 10m and wired without grounded
metal conduits, you are recommended to use an external lightning protection device.
• The ingress protection rating of the smart meter is IP20, which is suitable to be installed
indoors or inside of the distribution box. For outdoor installation, prepare a waterproof
cover (by yourself) to protect the smart meter. Otherwise it will cause damage to the
equipment, which is beyond the manufacturer's liability.
• Warning labels on the smart meter are as follows.
High voltage hazard. Power
off the smart meter first
before any operations.
Read through the guide
before any operations.
Potential risks exist. Wear
proper PPE before any
operations.
Equipment protected
throughout by DOUBLE
INSULATION or REINFORCED
INSUL ATION.
1
EN