Bext ® -150 Control Panel - Clarke Alto BEXT-100 Manual Del Operador

Ocultar thumbs Ver también para Alto BEXT-100:
Tabla de contenido

Publicidad

Page 16
5. If the extractor removes an excess amount of foam
from the carpet, add a de-foamer such as Clarkare
De-foamer Concentrate to the recovery tank. The
amount needed will vary according to the amount
of detergent already in the carpet.
CAUTION:
To prevent damage, use a water-based
de-foamer rather than an oil-based de-
foamer.
CAUTION:
Do not leave the extractor or other
cleaning machines or tools on the car-
pet when not in use. Cleaning solution
in the machines and tools can leak onto
the carpet and cause light spots or
stains.
NOTE: To order Clarkare
part no. 398421. To order Clarkare
order part no. 398420.
For instructions for preparation and operation of your floor
tool, read the instruction sheet given with your floor tool.
B
EXT
Control Panel
1
2
VAC 1
VAC 2
Figure 4
VACUUM SWITCH (1 &2): Each switch turns on one
vac motor. Turn both switches on for maximum lift.
The vac switches illuminate when turned on.
PUMP SWITCH (3): This switch will illuminate when
the pump is on.
B
®
EXT
Clarke
®
Extractor Concentrate, order
®
Defoamer,
®
®
-150
3
PUMP
-150, 150H, 300HV Operator's Manual
®

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Alto bext-100hAlto bext-300hvBext-150

Tabla de contenido