Peaq PMO G340-CWQK Manual De Instrucciones página 15

• Display time: On the display it will shows:
Continuous operations time of 4 hours has been
reached. For energy saving propose, the system
will enter standby mode after 60s, please push
any key to cancel.
General settings
MENU SETTINGS
With the device switched on, press shortly on the
multifunction switch. The main menu opens. Press
the multifunction switch up or down to select the
desired submenu. To confirm your selection, press
the multifunction switch again to the right. You can
change the settings by pressing the multifunction
switch up or down. Confirm the setting by pressing
the multifunction switch again to the right.
By pressing the multifunction switch to the left, you
return to the corresponding upper menu. To close
the main menu, press the multifunction switch to
the left until it closes.
The following main menu options are available:
• Display
> Brightness
> Contrast
> Black Equalize
> Preset
> Aspect Ratio
> Sharpness
> DCR
• Color
> Color Temperature
> Gamma
> Hue
> Saturation
> Low Blue Light
• Gaming Setup
> FreeSync Premium
> Overdrive
> Game Assist
> MPRT
> Low Input Lag
IM_PMO-G340-CWQK_211008_V05_HR.indb 15 IM_PMO-G340-CWQK_211008_V05_HR.indb 15
• Advanced Settings
> HDR
> KVM
• Input
> Single Input Mode
> Multi Input Mode
> Window 2 Position
> Window 2 size
> Multi Input Source
> Audio Source
• System Set
> Language
> RGB Light
> OSD Setup
> Audio
> Timing shutdown
> Reset
Set menu language
The menu may be preset to English.
For easy use of the self-explanatory menu, it is
advantageous to set it to the respective native
language. Proceed as follows:
1. With the monitor turned on, press shortly on the
multifunction switch.
2. Select the System Set item by pressing the
multi-selector up / down. Confirm the selection
by pressing the multifunction switch to the right.
3. The first point is Language. Press the
multifunction switch to the right to enter the
language selection menu.
4. Select the desired language by pressing the
multi-function switch up / down. Confirm the
selection by pressing the multifunction switch
to the right.
5. The desired language is now set. To exit the
menu, press the multifunction switch several
times to the left.
ENGLISH
15
8/10/2021 2:20 PM 8/10/2021 2:20 PM