cecotec CONGA ROCKSTAR 1500 RAY ERGOWET ANIMAL Manual De Instrucciones página 48

ENGLISH
Box content
Conga Rockstar 1500 Ray Ergowet Animal vacuum cleaner
-
2-in-1 accessory
-
Accessories for corner
-
Accessories for furniture
-
- Accessory for pets
- Jalisco brush
- Ergoflex tube
- Wall bracket
- Power adapter
- Instruction manual
3. PRODUCT ASSEMBLY
Assembling the suction tube and vacuum head
Fig. 2
- To install the vacuum head into the suction tube, match both parts ensuring the tab on the
vacuum head matches the guides on the tube, and insert the tube into the vacuum head
until firmly fixed.
- To disassemble them, press the vacuum-head release button, and pull from the suction
tube while firmly holding the vacuum head.
Note
When assembling these 2 parts, make sure the handle and the brush are facing the same
direction.
Assembling the suction tube, vacuum head, and main body
Fig. 3
To complete the vacuum cleaner's installation, once the vacuum head is mounted on the
suction tube, hold the tube vertically and insert it into the main body.
Assembling the battery
Fig. 4
Insert the battery in the corresponding slot on the main body. Once inserted, it will click
-
into place. Make sure it's secured in position.
To remove the battery, press the release button and remove it.
-
Note
Remove the battery and store it in a safe, dry place if the appliance is not going to be used in a
long period of time.
48