Publicidad
Idiomas disponibles
Idiomas disponibles
DRY TEMPERATURE
CYCLE SIGNAL
PERM PRESS
MEDIUM HEAT
REGULAR
HIGH HEAT
KNITS/DEUCATES
LOW HEAT
AIR FLUFF
>
NO HEAT
2 - WAY TUMBLE AaiON DRYING
TURN TO START
AUTOMATIC
REGULAR
COOL
LESS
down
DRY^ —^
10RE
^
DRY.^^^-
PRESS SAVERS
AUTOMATIC
PERM PRESS
TIMED
DRY
Cycle Selection
Turn cycle selector clockwise to desired cycle and setting.
Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to tumble
for 5-10 minutes. This reduces wrinkling and makes
items easier to handle during unloading.
Drying time varies depending on load size, dampness of
load and fabric type. Room temperature and humidity,
type of installation and electrical voltage or gas pressure
can also affect drying time.
Timed Dry Cycle
This cycle provides up to 70 minutes of drying time at
the temperature selection of your choice.
Automatic Perm Press Cycle
This cycle is best for permanent press, knit and delicate
items. Drying time is determined automatically at the
temperature selection of your choice.
• Medium heat is suggested for permanent press items.
• Low heat is suggested for knit and delicate items.
• If the dried load cannot be removed promptly, the
cycle selector will advance to the PRESS SAVER
setting.
• Unheated tumbling continues during PRESS SAVER
for 40 minutes to help reduce wrinkling.
• When the Cycle Signal is on, it will sound briefly every
5 minutes as a reminder to remove the load.
Automatic Regular Cycle
This cycle is best for cotton items that can be tumble
dried.
Drying time is determined automatically at the
temperature selection of your choice. This cycle is best
for items of similar fabric, weight and construction.
• For items requiring more drying time, set cycle selector
on MORE DRY.
• For items requiring less drying time, set cycle selector
on LESS DRY.
Energy Saving Tips
• Keep the lint screen clean and exhaust the dryer
correctly.
• Sort laundry properly and select proper temperature
and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a partially
dry load, and overdrying.
• Dry one load after another to take advantage of a
warm dryer.
• Opening the door needlessly causes warm air to
escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room
temperature is at least 45°F (7°C).
P/N 131633100 (9609)
Publicidad
