honor AM510 Guia De Inicio Rapido página 3

Product Description
1. Indicator
2. Function button
3. Strap holes
Functions
Powering on/off
Pairing with a
Bluetooth device
True Wireless
Stereo (TWS)
pairing
Making phone
calls
Press and hold the Function button for more than 2
seconds to power on or power off the Bluetooth
speaker.
When the speaker is powered on, tap the Function
button three times to enable Bluetooth pairing
mode.
When the speaker is powered on for the first
time, Bluetooth pairing mode is automatically
enabled.
Bluetooth device name: HONOR AM510
With both speakers powered on, select either of
them as the main speaker and tap the Function
button twice to enable TWS pairing mode. This will
cause the indicator to flash red and blue
alternatively. The other speaker must be in
Bluetooth pairing mode and not connected to
another device. If the secondary speaker is already
connected to a device, tap its Function button three
times to enable Bluetooth pairing mode.
After the TWS pairing between the two speakers is
successful, the indicator on the main speaker will
flash blue or remain steady blue, while the indicator
on the secondary speaker will flash blue.
You can tap the Function button twice again to
unpair them.
When a call is received:
• Press the Function button on the speaker to
answer the call.
1
4. Microphone
5. USB port
English