Publicidad
Idiomas disponibles
Idiomas disponibles
STEP-BY-STEP ASSEMBLY:
STEP 1:
Make sure the bolts go through the pre-drilled holes properly. Do not over tighten
1
bolts.
Anti-tip Restraint is REQUIRED in order to complete construction of this product.
When properly installed, this hardware can provide protection against the unexpected
STEP 2:
Carefully tap small wooden dowels into place. Leave 1/2" of the dowels sticking
2
out. Insert H2 into panel C. Refer to page 5 on how to use the cam lock system. Ensure all
hardware pieces are properly tightened. Make sure the bolts go through the pre-drilled holes
properly. Do not over tighten bolts.
finished edge
H7
H6
H5
tipping of furniture.
6/11
Publicidad
