Sailwin SW-F700 Manual Del Usuario página 3

SW-F700
Thank you for choosing FOG-700 colorful smoke machine. In order to help you understand how to use this
product more conveniently and quickly, please read this manual carefully.
1: After received the machine, please check whether the package is intact, then open the package,
check whether the machine is in good condition and all accessories are complete, if there is any
omission, please contact us.
Product Name
Fog Machine
Power Cable
Remote Control
2： Product introduction
Product Name: FOG-700 colorful smoke machine
Product model: AC110V or AC220V 50Hz
Light source: 9 LED three in one full-color light beads and 6 monochrome light beads
Preheating time: 2-3 minutes
Oil pot capacity: 150ml
Control mode: wireless remote control
Smoke spraying distance: About 3M
Product weight: 2.1kg
Product size: 20×18.5×27cm
3：Operation steps
①Open the bottle cap and add special smoke oil
②Plug in the power cord and turn on the switch
③ Wait for 2-3 minutes, the red indicator light on the machine is on, and press the remote control to select
smoking
4：Pay special attention to
① This product is in a heated state during use. The high temperature of the machine is normal, please do not
touch it with your hands.
②This product should be used in a dry place. Any liquid should not penetrate into the inside of the machine (just
in the oil bottle). If accidental infiltration occurs, turn off the power immediately and wait for the machine to
dry before using it.
③Keep away from flammable and explosive materials when using this product.
④ When the liquid in the oil bottle is about to run out, smoke fluid should be added immediately, otherwise
continuing to work will damage the machine.
⑤When the machine is working, please do not directly touch the smoke vent and the bottom of the machine with
your hands. To prevent burns.
⑥After use, it should be packaged and stored after it has cooled down.
⑦Turn off the the machine when no one is present.
5：Other Precautions
①All sprayers will produce a small amount of mist or moisture around the nozzle, and occasionally a small amount
of smoke will be emitted when it is stopped, which is a normal phenomenon.
② The machine is with a working mode of heating and cooling cycle. Only when the heating is completed, the
machine can start spraying.
③Regular cleaning is of great benefit to the machine. Poor atomized liquid will cause clogging. It is recommended
to use high-quality atomized liquid.
WWW.SAILWINLIGHT.COM
Quantity
1 pc
1 pc
1 pc
......................................................................................................■
............................................................................................................■
................................................................................................■
.........................................................................................................■
INFO@SAILWINLIGHT.COM
Accessories
Handle
Screws for Handle
1
Quantity
1 pc
2 pcs