Publicidad
Idiomas disponibles
Idiomas disponibles
REMOVING
CLOGS
When
the hose is clogged
with dust,
remove
it in the following
manner:
1. Pull out the handle
by turning
the
removal
ring in either direction.
2. Remove any clogs in the handle.
Shake
the hose to remove
any clogs.
3. Insert the handle in place and return the
ring to its original position.
4. Check the dust filter cover in the dust bin
and clean if necessary (See DUST BIN
CLEANING, page 14).
5. Check the secondary filter and clean if
necessary (See SECONDARY FILTER
CLEANING, page 16).
6. Check exhaust
filter and replace
if
necessary.
(See REPLACING
EXHAUST
FILTER, page
15).
CAUTION
Product Damage
Hazard
Do not use the hose without the handle in
place. If the hose is used without the
handle, the hose will bend excessively,
causing it to crack.
Ring
CLEANING EXTERIOR AND ATTACHMENTS
1. Turn off and unplug vacuum cleaner. DO
NOT drip water on vacuum cleaner.
2. To clean exterior,
or to reduce static
electricity
and dust build-up,
wipe outer
surface of vacuum
cleaner
and attach-
ments.
Use a clean, soft cloth that has
been dipped
in a solution
of mild liquid
detergent
and water, then wrung
dry. Wipe
dry after cleaning.
CAUTION
Do not use attachments
if they are wet.
Attachments
used in dirty areas, such as
under a refrigerator,
should not be used
on other surfaces
until they are washed.
They could leave marks.
12
Publicidad
