HOW TO USE
BEFORE FIRST USE
1. Remove all packaging material, labels and/or stickers from your toaster. Make
sure there is no packaging material remaining in the slots.
2. Insert the removable crumb tray into the crumb tray slot.
3. Select a location for the toaster. The location should be:
- A flat, heat-resistant, non-flammable surface
- At least 10 cm. away from walls or back of the countertops
- At least 30 cm. away from cabinet or shelving that may be above the toaster
- Away from flammable materials, such as curtains and wall fabric
- Away from a gas stove flame or electric element
4. Plug the power cord into 220-240Volt, 50Hz AC outlet. To minimize cord clutter
on kitchen countertops, use Cord Wrap located under the toaster.
USING YOUR TOASTER
1. Most types of the breads can be toasted. However, the slice should not be so
small as to drop into the bread slot.
2. The slice should be placed in the center of slot.
3. After insert the bread into the slots, select the designed darkness setting(toasting
time) by the Bread Browning Lever and press the Push knob down until it locked.
The auto-adjusting bread guides(located inside the toasting slots) will
automatically center the bread for even browning. After the designed darkness
setting is over, the bread will pop up automatically and the Push knob and auto-
adjusting bread guides will return to its original position.
4. The surface of the net, the heating element, the toasting slots or the side cover is
hot, so, removing the toasted bread must be carefully.
WARNING:
1. Toasted bread can be very hot. Handle with care.
2. Unplug the cord and move the Push knob up and down a few times to raise
"jammed" bread.
3. Never use metal utensils to free bread.
4. Never insert your finger or metallic utensils into the bread slots or net.
CARE AND CLEANING
Clean the toaster regularly. This appliance contains no user serviceable parts and
requires little maintenance. Leave any servicing or repair to qualified personnel.
DO NOT IMMERSE THE TOASTER IN WATER.
After use and before cleaning, unplug the toaster power cord from the power outlet
and wait for the toaster to cool.
• Cleaning top surface: Unplug from outlet and allow to cool before cleaning. Wipe