Publicidad
Idiomas disponibles
Idiomas disponibles
INSERTING THE BATTERIES
Remove the battery cover (6) and insert 2 x 1.5 V AA batteries into the
battery compartment. Check that the batteries are correctly fitted.
Replace the battery cover.
INSTRUCTION FOR USE
• Lay your clothes on a flat level surface, preferably an ironing
board or pad.
• Switch the lint remover on using the on/off button (3).
• Smooth out the fabric and place the cutting foil (1) against it.
• Move the cutting foil in gentle circles while applying very light
pressure. Do not press the cutting foil hard against the fabric.
• Cut-off lint and threads are collected in the collector (7).
• If the blades (2) become blocked with cut-off threads and lint,
unscrew the cutting foil to remove the blockage. Take care not
to cut yourself on the blades! Screw the cutting foil back in
place before switching the lint remover back on.
CARE AND CLEAN
• Please check the polarity of the batteries to make sure they are
in right positions.
• Check the battery power to make sure they do not need to be
replaced with new ones.
• Remove the batteries from the lint remover if it is not going to
be used for a prolonged period.
• Inspect the blade and net by gently pressing on the net to make
sure the blades and net are not hitting each other.
• Turn the operating switch "OFF" and remove the batteries.
• Carefully use a flat edge screwdriver or coin and push the blade
Publicidad
