STEP 3 Flooring
STEP 4 Adjust the levelling feet
A
Untitled-11 27
• The surface to install the refrigerator
must support a fully loaded refrigerator,
or approximately 100 kg.
• To protect the floor, put a large piece
of cardboard on each leg of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpets along the movement
path.
Level the refrigerator by manually
adjusting the levelling feet. Turn the
levelling feet clockwise to lower the
position, or turn counter clockwise to raise.
Leave the feet at least 35 mm (A) from the
floor as shown.
English 27
2016-12-19
11:45:23