Step 5: Prior to first use - Fully charge your
barcode reader.
Use a USB-C wall charger to charge batteries until the
battery light turns solid green (up to 8 hours).
Scan
button
Volume
button
Charging Requirements: Min 5.0 VDC, 1 AMP
Important: Do not charge Socket Mobile data readers
in temperatures above 100°F/40°C, as the reader may
not charge properly.
Charging from a computer or laptop USB port will not
provide enough power and could cause charging,
connection or scanning performance issues.
Charging
Cable
Max 5.5 VDC, 3 AMPs
Scan
button
Phone
Power
button
LED's
(Green/
Yellow/
Red)
Green Light = Fully charged
*Preinstalled rechargeable
battery included
8 Hours
Scan
button
Wrist
Strap
eyelet