ELECTROTEK ET-BA150 Manual De Instrucciones página 8

OPERATION.
A. SPEED SELECTOR.
B. "EJECT" BUTTON TO EJECT RODS.
C. TURBO BUTTON.
D. ENGINE OF THE MIXER.
E. RODS TO BEAT.
F. RODS TO KNEAD.
- Make sure that the blender is unplugged from the electric current.
- Put the blender rods or kneading rods, ensuring that they are firmly fixed.
- Start the blender by selecting the desired speed.
- You can press the turbo button at short intervals for maximum speed on time.
- When your mix or dough is ready, turn the selector to the off position and unplug it.
WARNINGS:
- Never exceed 4 minutes in a row in operation.
- Use a maximum 2 cycles of 4 minutes with a 10 minutes rest (4-10-4).
- After using 2 cycles, let the engine cool down for 30 to 60 minutes.
AFTER OF THE USE.
- Immediately after use, unplug the electric current.
- Eject the rods.
- Wash the rods used and clean the blender.
- Allow to dry well and store in a cool and dry place.