Thulos TH-TP102 Manual De Instrucciones página 7

twisting it around.
 Place the appliance on a sufficiently flat and stable surface to prevent it from falling.
 Let the appliance cool down before cleaning and storing.
 Ensure that the appliance does not come into contact with easily flammable materials such as
curtains, fabrics, etc. When it is in operation, as it could cause a fire. Leave a minimum distance of
one meter between the apparatus and flammable materials.
 Do not clean the appliance with metal or abrasive utensils to avoid the risk of short circuits and
damage the surfaces of the finish.
 Do not cover the appliance or its ventilation holes as this could result in a fire.
SPECIAL SAFETY INSTRUCTIONS
 This device should only be touched by the side handles.
 Do not move your toaster while it is running.
 The top rack may remain hot minutes after last use.
 The exterior surface heats up during operation, be careful not to touch it.
 Remove the tray after each use.
 Do not use your toaster to defrost food.
USE
 Insert the plug into a grounded plug.
 During the first use, turn the timer knob to maximum without bread on the grill. Your toaster will
emit smell and smoke, this is normal and will disappear after this first use.
 Put the bread on the rack. Always leave a 1cm gap between each slice, to avoid overheating your
toaster.
 Turn the timer knob to the desired position. The resistors will light up slowly.
 After the set time, a bell will sound and your toaster will turn off automatically.
 You can interrupt toasting at any time by turning the timer knob to 0.
CLEANING AND MAINTENANCE
 Unplug and allow to cool before cleaning your toaster.
 Do not immerse your toaster in water or any liquid. The exterior surface can be cleaned with a
clean, damp cloth.
 If stains continue to occur, soapy water can be used, preventing them from entering through the
ventilation slots.
 Do not use abrasive cleaners or sharp utensils to clean the exterior surface.
 The pickup tray can be removed for cleaning. To do this pull the lower groove out. Once clean and
dry, carefully insert it into its slot.
Attention
Failure to follow the recommendations for use and cleaning of this manual may result in partial or total
loss of warranty.
Handling by personnel other than the manufacturer may cause partial or total loss of the warranty.