Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION AND USE OF THE ACCESSORIES.
Extension hose.
- The extension hose improves comfort in the application of steam.
- The brush head and angled nozzle can be installed on it.
Ironing accessory.
- It has a larger emission surface for application in carpets, curtains, etc.
- It allows to eliminate the wrinkles of the fabrics.
- Installation: Slide the accessory into the bayonet mounting socket of the device and rotate it
completely clockwise until it can no longer rotate.
Brush head and angle nozzle.
- The brush head helps eliminate persistent dirt.
- The angle nozzle helps to reach areas around the corners.
- Installation: Press the accessory tool firmly into the connection nipple of the
device, extension hose or nozzle head.
Glass cleaner.
- The glass cleaner can be used to clean smooth, flat windows, windows and floors.
Cloth cover.
- The cloth cover helps trap dust and dirt when using the steam iron.
- It can be washed to reuse.
HOW TO ADD WATER.
MOUNTING THE GLASS CLEANER
- Accessories are needed cleaner glass and
- Position and match clips A and B of both
- First hook the clips A and then the B
- To disassemble: push the upper clip B and
push forward, then unhook the A clips and
remove the glass cleaner accessory.
1. Remember that the appliance must be cold before opening the
stopper to add water.
2. Open the safety stopper by turning it anti-clockwise.
3. Fill the measuring cup with clean distilled water up to 250ml.
4. Put the funnel and pour the water from the measuring cup.
5. Close the safety stopper firmly by turning it clockwise
schedule.
NOTE: Never fill more than 250ml.
If filling water there is some water inside, empty before filling to
make sure it fills 250ml.
the ironing.
accessories.
between both accessories.
Publicidad
