CHARGING THE TRIMMER BATTERY.
Before using the trimmer for the first time, you must charge it for 14-16 hours.
- Make sure the product is turned off.
- Place the trimmer in the charge holder.
- Connect the plug of cable to the trimmer and then connect to the electrical outlet.
- The charge indicator will light.
- Never interrupt the charge once plugged in until complete.
NOTE:
- If you are not going to use the trimmer for a prolonged period of 2-3 months,
disconnect it of the electrical network and when you use it again, recharge it completely.
MODE OF USE.
1. Select the desired adapter and place it on the machine.
2. Select the desired length setting.
3. Slide the switch up to turn on the appliance.
4. The adjustable comb attachment (1-10 mm) is a precision adapter,
while the adjustable comb attachment (3-18 mm) is used for hair.
(NOTE: a click sound means the adapter is ready).
5. HAIR:
- It must be dry and free of lotions or other liquids.
- It is convenient to comb the hair or beard before using the appliance.
6. BEARD AND MUSTACHE:
- Use a small comb (10 mm) to straighten the hairs to trim.
- When trimming, first select the precision adapter.
7. SHAVING MICRO:
- Use the shaved Micro adapter to clean small areas of hair.
8. EARS:
- Insert the trimmer gently into the ear without deviating and with
controlled movements.
- Do not insert it too much into the ear canal as it may cause an injury.
9. EYEBROW:
- Gently guide the cutting unit without deviating, and cut the unwanted hairs as
along the line of the eyebrows or protruding from the eyebrow itself.
- To remove the hairs completely move it by the desired edge.
3