Thulos TH-CP320 Manual De Instrucciones página 12

PROFILING.
- Turn on the device.
- Use both edges of the blade to create sharp lines and perfect edges.
- Hold the product in such a way that the blade is perpendicular to the skin and one of its edges touches
the skin. This allows more precise detailing of sideburns and the area around the mouth and nose.
- To use the blade for creating sharp edges and lines, use either edge of the blade (Fig. 4).
- Place the edge of the blade perpendicular on to the skin (Fig 5 ).
- Make straight strokes while applying gentle pressure (Fig. 6).
- Turn off, clean and grease the appliance after each use (in that order).
Trimming with Adjustable Comb.
- The precision trimming comb allows you to trim hair to different lengths.
- When you trim for the first time, start at the highest length setting to familiarize yourself with the
product.
- The settings on the wheel correspond to the remaining hair length after trimming in millimeters. - You
can select a length from 0.5mm to 10mm.
- Place the front part of the comb onto the blade and push the projection at the back of the comb into
the product ('click') (Fig. 7).
- Cut in the direction of the teeth so that the flat part of the comb is in full contact with the skin (Fig. 8).
- Since all hairs do not grow in the same direction, you may want to try different trimming positions
(i.e. upwards, downwards, or across). Practice is best for optimum results.
- Make sure to always move the product against the grain.
- Trimming is easier when the skin and hair are dry.
- To remove the comb, pull the back part off the product and then slide the comb off the blade.
CLEANING.
- Clean the product after every use.
- Never use scouring pads, abrasive cleaning agents or aggressive such as gasoline or acetone to clean.
- Do not press the appliance or the blade against a surface, it may cause damage to the product and
blade. If the blade is damaged, replace immediately.
- Never dry the blade with a towel or tissue, as this may cause damage.