FOR YOUR OWN SAFETY
1. Read all instructions before using the fan heater.
2. Only connect the fan heater to a single-phase socket with a main voltage as specified
on the rating plate.
3. This appliance meets the electromagnetic compatibility requirements
specified in BN 55104/95 with regard to interference with radio and TV sets.
4. Do not leave your home while the appliance is in function: ensure that the switch is in
OFF(0) position and the thermostat is in minimum position. Always unplug the appliance.
5. Keep combustible material such as furniture, cushions, bedding, paper, clothes,
curtains etc. at least 100cm away from the fan heater.
6. If wall mounted do not fix to combustible material such as wooden, synthetic or plastic
surfaces. Do not hang anything on or in front of the fan heater.
7. Always unplug the heater when not in use. Dot not pull the cord to unplug the heater.
8. Keep the air inlet and outlet free from objects: at least 1 m in front and 50 cm behind
the heater.
9. Do not install the heater right below a socket.
10. Do not let animals or children touch or play with the fan heater. Pay attention! The air
outlet gets hot during operation (more than 80 , or 175 F ).
11. Do not cover. If covered, there is the risk of overheating.
12. Do not use this fan heater in the immediate surroundings of a bath, a shower or a
swimming pool.
13. Do not use the fan heater in the rooms with explosive gas or while using inflammable
solvents, varnish or glue.
14. If the cord of this appliance is damaged discontinue use of this product and contact
your retailer for further instructions.
15.Keep the fan heater clean. Do not allow any objects to enter any ventilation or exhaust
opening as this may cause electric shock, or fire or damage to the heater.
INSTALLATION
The appliance requires no installation, it should be used solely as a portable appliance.
Portable appliances are not suitable for use in a bathroom.
OPERATION
- Turn the thermostat knob(right) in a clockwise direction until it reaches the maximum
setting.
- Summer service (ventilation only): turn the knob to setting
- Heating at reduced power: turn the knob(right) to setting (900W).
- Heating at full power: turn the (right) to setting (1800W).
- Switching off: turn the knob (left) to setting O.
P-2