Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTING THE TEMPERATURE LIMITER AND WATER FLOW ON THE VALVE
3. To adjust for the desired maximum water temperature:
a. For colder water, adjust the stop ring (1) in a
clockwise direction and reinstall the stop ring (1)
onto the cartridge assembly (L).
b. For hotter water, adjust the stop ring (1) in a
counterclockwise direction and reinstall the stop
ring (1) onto the cartridge assembly (L).
NOTE: A thermometer (not included) can be held
in the running water to aid in reaching the desired
water temperature.
4. Replace the escutcheon (E) and handle assembly (F)
back onto the valve body (D). Do not overtighten the
handle (F) as this could damage the escutcheon (E).
NOTE: Rotate the cartridge stem (1) clockwise to
turn off the water before you install the handle.
3
3
For colder water
L
1
4
9
For hotter water
L
1
D
1
E
F
Publicidad
