Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Gently shake or tap the dust box and the cover to empty.
5.
Use a soft brush to clean the filter.
NOTICE: The filter cannot be rinsed with water.
6.
Reattach the upper cover to the box, and firmly reinstall the box on the sander.
WARNING:
Collected
sanding dust from sanding surface coatings such as
polyurethanes,
linseed oil, etc. can self-ignite
in the sander dust box or elsewhere
and cause fire. To reduce the risk of fire, always empty the dust box frequently
while sanding and never store or leave a sander without totally emptying
its dust
box. Also follow the recommendations
of the coating manufacturers.
GENERAL
MAINTENANCE
Avoid using solvents
when cleaning plastic parts. Most plastics are susceptible
to damage from various types of commercial
solvents
and may be damaged
by their use. Use clean clothes to remove dirt, dust, oil, grease, etc. Keep all
ventilation
openings
clean.
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based
products,
penetrating
oils, etc. come in contact with plastic parts. Chemicals
can
damage, weaken or destroy plastic which may result in serious personal injury.
WARNING:
When servicing,
use only identical
replacement
parts. Use of any
other parts may create a hazard or cause product damage.
To ensure safety and
reliability,
all repairs should be performed
by a qualified service technician.
PROBLEM
The sander does not
work
Unsatisfactory
sanding
result
CAUSE
Not connected
to power
source
Sandpaper
is worn
Sandpaper
is not suitable
for the workpiece
SOLUTION
Plug the sander
into a
power source
Install new sandpaper
Use correct
sandpaper
17
Publicidad
