Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
and the delay icon blinks.
1. Load your laundry and make sure the machine door is closed.
2. Press the On/Off button,then turn the programme selector knob and select the
desired programme.
3. You can select the Anti-Crease or Fiber Master function according to your need.
4.Press the Delay button.
5. Continue to press Delay to select the desired delay time.
6. After the Start/Pause button is pushed, the dryer is at the run condition. The
drying procedure will be automatically performed when the delay time is over.
7. If you push the Start/Pause button again, the delay function will be paused.
8. If you want to cancel the "Delay" function, please press the On/Off button.
- Time
When the Time Dry or Refresh programme is selected, the Time button can be used
to adjust the drying time in 10 min. steps.
- Anti-Crease
At the end of the drying cycle, the anti-crease time is 30 minutes (default) or 120
minutes (selected).
The Anti-Crease light will illuminate when the anti-crease function is selected. This
function prevents the laundry from creases. The laundry can be removed during the
anti-crease phase. Except Time Dry , Refresh , Wool all the other programmes provide
this function.
- Favorite
Used to define and save your favourite programme, which is used frequently.
1.Select the desired programme and other drying functions.
2.Press and hold the Anti Crease and Fiber Master button for 3 seconds until the beep
sounds and the desired programme has been saved.
3. Turn the programme selector to the Favorite position, then you can start your
favorite programme.
If you want to change the Favorite settings, repeat the steps 1 and 2.
- Child Lock
1.This machine incorporates a special child safety lock, which can prevent children
32
SECADORA EVVO NOVA S8 / S8X
Publicidad
