Craftsman 320.39590 Manual Del Operador página 15

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible
to damage from various types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. Keep all
ventilation openings clean.
_1_ WARNING: Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
_, WARNING: When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
PROBLEM CAUSE
The sander does not Not connected to power
work source
Unsatisfactory sanding
result
Sandpaper is worn
Sandpaper is not
suitable for the
workpiece
SOLUTION
Plug the sander into a
power source
Replace with new
sandpaper
Use correct sandpaper
15