EVVO A12 Manual De Instrucciones página 14

ENGLISH
product.
Use a soft, dampened and clean cloth to clean the product's exterior housing.
Do not let water enter the vacuum cleaner.
Make sure the product is completely cool and dry before storing it.
Do not wind the cable around the product, this could damage it.
Store the appliance in a cool, dry place out of the reach of children.
Cleaning the dust tank and the filters. Fig. 4
To prevent the appliance from overheating and losing suction power, it is suggested
to clean the filters frequently. To make the most of the suction power, itis suggested
to clean the filter after every use.
Make sure that the vacuum cleaner is not connected to a power outlet.Open the
compartment at the bottom of the main body by gently pulling the tab.
Empty the dirt from the tank and clean it with a soft, damp cloth.
Remove the plastic protective filter by turning it counterclockwise. Clean it with a soft
cloth or paper. Remove the high efficiency filter by turning it counter clockwise and
clean it with a soft cloth or paper.
Clean the protective filter with a soft cloth. Remove the high efficiency filter by turning
it counterclockwise and clean it with a cloth or paper. Vacuum and shake the filters
to remove all particles and dust debris that may clog them and hinder proper air
circulation.
Remember not to use the vacuum cleaner without the filters properly in place.
Replace the high efficiency filter and the plastic filter guard in place and turn them
clockwise to lock them in place.To remove the filter guard from the motor, turn the
back cover counterclockwise and remove the filter.
To clean it, tap it gently or use a cloth or paper. Replace the filter in its location, put the
14
EVVO ASPIRADOR VERTICAL CON CABLE A12