Xiaomi POCO X6 5G Guia De Inicio Rapido página 15

This cell phone offers the following frequency bands in
EU areas only and maximum radio-frequency power:
GSM 850: 33.8 dBm
GSM 900: 35.5 dBm
GSM 1800: 32.5 dBm
GSM1900: 30.5 dBm
WCDMA band 1/8: 25.7 dBm
LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm
Banda 5G NR n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm,Banda 5G NR n77/n78:
29 dBm
Bluetooth: 20 dBm
2.4 GHz band Wi-Fi: 20 dBm
5 GHz Wi-Fi: 5150–5250 MHz: 23 dBm, 5250–5350 MHz: 23 dBm,
5470–5725 MHz: 23 dBm, 5725–5850 MHz: 14 dBm
NFC: 13.56 MHz < 42 dBuA/m at 10 m
5G connection depends on country, carrier, and user environment.
FCC Regulations
This cell phone complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions: (1) This device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This cell phone has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference with
radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by taking one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Move the equipment further away from the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information (SAR)
This device meets the government's requirements for exposure to radio waves. This
device is designed and manufactured not to exceed the emission limits for exposure to
RF energy. The exposure standard for wireless devices employs a unit of measurement
known as the Specific Absorption Rate or SAR. The SAR limit set by the FCC is 1.6 W/
kg. For use with a wearable accessory, this device has been tested and found to
comply with the FCC RF exposure guidelines for use with a metal-free accessory that
positions the device at least 1.5 cm (5/8 inch) away from the body. No metal-containing
accessory worn on the body has been tested or certified as safe for RF exposure, so the
use of such an accessory should be avoided. Accessories are commercially available
and must be used to maintain a distance of at least 1.5 cm (5/8 inch) between the EUT
device and the body.
FCC Notice
Any changes or modifications that are not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Shielded cables must be used with this device to comply with FCC Class B limits.
E-label
This device has an electronic label for information about
certifications. To view this label, go to select Settings > About Phone > Certification or
go to Settings, then type "Certification"
into the search bar.
Certification information (highest SAR value)
SAR limit 10 g: 2.0 W/kg,
SAR: Head: 0.999 W/kg, Body: 0.999 W/kg (5 mm distance).
SAR limit 1 g: 1.6 W/kg, SAR value: Head: 1.09 W/kg,
Body: 1.03 W/kg (15 mm distance).
Connection Point: 1.09 W/kg (10-mm distance).
Model: 23122PCD1G
2312 indicates that the product will be launched after 202312.
NOM Regulations