Publicidad
Idiomas disponibles
Idiomas disponibles
Settings
Setting menu. After the selection, turn the phone off and on
again to begin using the new frequency setting. When
traveling to different parts of the world, you must always set
the World Phone Setting to the correct frequency band.
GPRS Attach
(Menu 9.5.3)
If you select Power On and you are in a network that
supports packet data, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker. If
you select When Needed, the phone will use a packet
data connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is not used by any application.
n
Note
If there is no GPRS coverage and you have chosen Power
On, the phone will periodically try to establish a packet data
connection.
Access Point
(Menu 9.5.4)
This feature sets the Profile during the WAP and MMS
connections. Please see page 45 for further detail. The
Profile menu under the Access Point feature will
68
display Add, Delete and Editor options, but the reason
why Activate option is not available is because there is
no way of knowing whether WAP or MMS will be used
to activate the content.
Reset Access Point
(Menu 9.5.5)
This allows Profile information to be restored to
original setting. For example, this option will restore
the Profile that has been deleted by the Delete All
selection from the Access Point (Menu 3.4) submenu.
Reset Setting
You can easily reset your phone to its default
configuration. To do so, proceed, as follows.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
n
Note
The password is preset to 0000.
Menu 9.6
Publicidad
