Publicidad
Idiomas disponibles
Idiomas disponibles
Header Wall
Header Bracket
Idler Pulley
INSTALLATION
STEP
3
Attach
the Rail
to the
Header
Bracket
NOTE: (Optional) With an existing Craftsman
installation, you may re-use the old header bracket
with the two plastic spacers included in the hardware
bag. Place the spacers inside the bracket on each
side of the rail, as illustrated.
• Position the opener on the garage floor below the
header bracket. Use packing material as a
protective base. NOTE: If the door spring is in the
way you'll need help. Have someone hold the
opener securely on a temporary support to allow
the rail to clear the spring.
• Position the front rail end within the header bracket
and join with a 5/16"x1-1/2" clevis pin as shown.
• Insert a ring fastener to secure.
Spring
/
Mounting
Hole
0
Existing
Header Bracket
0
Mounting
Hole
OPTION WITH
EXISTING CRAFTSMAN
INSTALLATION
Garage
Door
Opener Carton or
Temporary
Support
HARDWARE
SHOWN ACTUAL SIZE
Clevis Pin 5/16"xl-1/2"
Ring fastener
15
Publicidad
