Publicidad
Idiomas disponibles
Idiomas disponibles
GB
General description
A – Concentrator
B – Air inlets
C – Hanging loop
D – Temperature switch
Using the appliance
Drying
1.
Make sure the air flow switch is in the "0" position.
2.
Put the plug into wall socket.
3.
Select the desired temperature switch to cool, warm or hot setting.
•
The cool setting " * " allows you to dry hair that is almost dry and helps to seal in shine.
•
The warm setting "1" is especially suitable for drying dump hair until it almost dries.
•
The hot setting "2" which let you to dry wet hair very quickly.
4.
Dry your hair by making brushing movements with the hairdryer at a small distance from your hair.
5.
Set the airflow switch position to "0" after drying and unplug. Allow the hair dryer to cool for 10 to 15
minutes before storing it.
Concentrator
With dryer concentrator, you can direct the airflow straight at the brush or comb with which you are styling
your hair.
•
Pre-dry your hair with the hairdryer on the highest heat setting. For drying, separate your hair into 5-cm wide
sections. Pl
ace a large round brush at the root of one of the sections.
•
Point the hair dryer with the concentrator at a 90-degree angle to the section and run the brush under it, beginning
at the roots and working down to the tips. Your hair dryer should now be set at medium. Repeat the process several
times to dry the section completely before moving on to the next section.
•
Finish by turning the ends under.
6
Publicidad
