MAJORITY Humboldt Manual De Instrucciones página 12

Instructions Guide
Network
● While in 'System Settings' , press 12 w/s 3 to select Network. Press the SELECT button to confirm.
●
Press 12 w/s 3 buttons to select from the following settings, press the SELECT button to confirm
Network wizard
PBC Wlan setup
View settings
Manual settings
NetRemote
PIN Setup
Network profile
Clear network
settings
Keep network
connected
3. Press the BACK button on the unit or remote control to cancel the setting and return back to the
previous menu.
Time/Date
The Time/Date can be automatically set once it has been connected to the Internet, DAB or FM radio
station with time/date information. You may also adjust the Time/Date manually.
Press CLOCK button on remote control can access Set Time/Date menu to adjust Time/Date,
Alternatively,
- In System Settings, press 12 w/s 3 buttons to select Time/Date and press the SELECT button to
confirm. Press 12 w/s 3 buttons to select Set Time/Date and press the SELECT button to confirm.
1. The date digits will flash on the display.
2. Press 12 w/s 3 buttons to adjust the day and then press the SELECT button to confirm.
3. Repeat above Step (2) to set the Month/Year/Hour/Minute.
4. The date and time settings are now complete.
12
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Manual config – select wireless network with DHCP enable/disable.
Select WPS on the unit and press the WPS button on the modem device
that you wish to connect with. Press TUNING/SELECT dial on unit or
SELECT button on remote control to continue.
Display the setting on the unit.
Select wireless network with DHCP enable/disable.
To define a PIN number to be entered before being able to connect to
the unit remotely over a network
View the connected network.
To delete the connected network memory in Network profile.
To define whether remains connected to its network in Standby mode
and when not in Network radio mode.
EN