Publicidad
Idiomas disponibles
Idiomas disponibles
UK
NL
DE
FR
Technical Data:
Type LED: 20 W 55 SMD
Brightness: 2000/1000 Lumen
Battery: 3.7 V 8 Ah
IP rating: IP65
IK rating: IK08
Charging time: 6 hours
Run time: 2.5 ~ 6 hours
Working temperature: -20 ~ 50°C
Product dimensions: 208x204x52 mm
Power connection:
Use the lamp within places prescribed and governed by current regulations on workplaces and electrical systems. Check that the plug
fitted on the cable is suitable for the work environment, if it is not, it must be replaced by a qualified electrician.
Main features:
• Rechargeable flood light with SMD LED technology
• SMD LEDs provide 2000/1000 Lumen
• Long life SMD LEDs (life span 100.000 hours)
• 110 ~ 120° swivel base
• Powerbank function
• M8 hole to support with tripod
• Low power consumption, low heat emission
• Lamp use is not affected by cold temperatures
• Cordless design improves safety, convenience and flexibility
• 3.7 V 8 Ah Li-Ion battery provides 2.5 ~ 6 hours constant light output
• Battery charge level indicator for easy monitoring
• Anti-glare diffusor
• IP65 rated
• IK08 rated
• Robust, shock resistant ABS housing
Instructions for use:
• Charge the battery for at least 8 hours before first use
• To charge the lamp: connect the cable via the USB-C to the lamp directly. Then connect the USB plug to either the 100 ~ 240 V
adapter (optional) or any other USB power source available (Max. charging amp. 2 A) and then plug into a wall socket. Please
recharge in good time
• Low battery warning: The light will flash 4 ~ 6 times about 15 minutes before battery runs out
• The work light is controlled by 1 button. Push the ON/OFF button (1x) for 50% setting (1000 Lumen), 2x for 100% setting (2000 Lumen)
and 3x to turn the unit OFF
• Do not leave the battery in a fully discharged condition. Recharge the lamp at least once every 30 days. Always fully charge the
battery to extend the battery lifetime.
Accessories and spare parts:
1 m USB-C cable
100 ~ 240 V USB-charger optional (SIN-100.1002A)
USB-car charger optional (SIN-100.1060-1 )
Use only accessories and spare parts approved by the manufacturer
Caution:
• Avoid looking directly into the beam
• Do not use the lamp near open flames
• Switch off the lamp when not in use
• Only use this lamp for the purpose it is designed to, all modifications are strictly prohibited
• Should any cable be damaged, it must be immediately replaced with one of the same type
• When plugging the charger into a suitable mains supply, always check that the device is in good condition, and does not appear
damaged as this may impair safety
Warranty/Service:
• 12 months from the date of the purchase – Proof of purchase is required to make any warranty claim
• The warranty does not apply in case of damage to the device due to negligent / improper use or accidental damage
2
ES
Lumen Laser class I
Protection class III
EAN: 8717775513599
Colour temperature: 6000 K
Weight: 670 g
Hydrocarbon and UV resistant
Technical data optional charger (SIN-100.1002A):
Voltage: AC 100 V ~ 240 V
Frequency: 50/60 Hz
Charger output voltage: 5 V 2 A
110 ~ 120°
Publicidad
