Miele Turbo Mini Compact Instrucciones De Manejo página 58

en (USA)
When using the hand-held Turbo-
brush follow the Important Safety In-
structions in the Operating Manual
of your vacuum cleaner.
Recommended use
(see illustration on page 2)
The hand-held Turbobrush is intended for
vacuuming upholstered furniture, mat-
tresses, car seats, carpeted stairs, etc.
The rotation of the roller brush intensi-
fies the pick-up of hairs and lint.
It is important to observe the cleaning
and care instructions of the manufac-
turer of the surface to be vacuumed.
Installing the handheld Turbo-
brush
^ Fit the hand-held Turbobrush on the
suction wand or on the handpiece,
depending on what is the most con-
venient for you for the type of vacuu-
ming you will be doing.
You can also attach the hand-held Tur-
bobrush to the suction hose separate
from the handpiece.
^ To do this, fit the suction hose into
the hand-held Turbobrush and turn it
until it clicks firmly into place.
^ When you want to separate the com-
ponents, press the release button on
the suction hose.
Using the hand-held Turbo-
brush
^ For best results, use a medium suction
power setting and pass the hand-held
Turbobrush slowly back and forth over
the surface to be vacuumed.
58
All manuals and user guides at all-guides.com
The rotating brush head can be adjus-
ted to the optimal angle.
Use the ribs on the side of the
hand-held Turbobrush to aid in the re-
moval of stubborn dirt.
Maintenance and care
(see illustrations on page 2)
Removing threads and hairs
^ With a pair of scissors, cut any thre-
^ Then run the vacuum cleaner to va-
For more obstinate dirt or blockages in-
side the hand-held Turbobrush, the co-
ver can be opened. Any large particles
inside it can then be easily removed.
^ Press the release button and remove
^ Remove any dirt adhering to the insi-
^ Put the service flap back on.
Changing the thread collector
Replace the thread catcher located at
the suction hole of the hand-held Tur-
bobrush when the pile is worn.
^ With a knife, for example, lift the thre-
^ Insert the new thread catcher.
,
Always turn the vacuum cleaner
off and remove the plug from the
electrical outlet before cleaning or
servicing the hand-held Turbobrush.
ads or hairs that have become entan-
gled on the roller brush. To guide the
scissors, move along the guide track
in the roller.
cuum up the pieces.
the service flap opposite it.
de of the casing and from the roller
brush.
ad catcher out of the slots at the red
markings on the side.