Publicidad
Idiomas disponibles
Idiomas disponibles
POLO 2.0
ASSEMBLY PROCESS
32
1. Place the gas cylinder next to the patio heater.
2. Screw the swivel nut (left-hand thread) on the hose
end onto the screw connection on the patio heater.
Tighten the swivel nut firmly by hand. Do not use
tools to avoid damaging the gasket.
2.1 GB (CLICK ON) CONNECTING THE GAS CYLINDER:
Screw the union nut (left-hand thread) of the
pressure regulator onto the thread on the gas
cylinder or connect the pressure regulator to the
connection on the gas cylinder and secure with the
Click ON fastener.
3. Screw the adapter (right-hand thread) hand tight
onto the thread on the patio heater. Do not use tools
here either to avoid damaging the gasket. Connect
the hose to the adapter nozzle and secure with the
hose clamp.
4. Connect the other end of the hose to the nozzle on
the pressure regulator and also secure with the
hose clamp.
5. Spray all sealing points with standard leak detection
spray or brush on soapy water (ratio 1 part soap/3
parts water). Open the valve on the gas cylinder.
Bubbles will form wherever there are leaks. Close
the valve on the gas cylinder and fix the leak. Then
repeat step 5 until all leaks are fixed.
!
ATTENTION
Gas cylinders with maximum dimensions of
Ø 30 x 59 cm can be used and placed in the grill
cart. Larger cylinders can only be placed next
to the grill.
1
7
546033
220510
Publicidad
