4. ASSEMBLY
Look at the following picture, iron assembly.
The machine is equipped with a safety
thermostat with manual switch. In case of
operation, apply to the technical
assistance centre.
The machine works with normal tap water.
Do not switch on the machine with no
water in the boiler.
Do not unscrew the cap while boiler is in
use or under pressure.
The filling cap includes the safety valve; in
case of replacement use original part only.
5. USE
Follow the instructions and the pictures:
7) Boiler filling
8) Fill the boiler without exceeding maximum
level.
9) Insert the plug in an earthed, 230V 50 Hz.
10) Switch-on the boiler and iron switches.
Start ironing only when green lamp light
up
21/03/03
7