Publicidad
Fine adjustment of preset
Lighting
burner
Unit switch
Inflation
Start inflation
Stop inflation
After selecting the profile, rotate the "control push knob"
clockwise to "+" and anti-clockwise to "-" to adjust the preset
pressure value. When adjusting the preset pressure value, the
flashing number indicates the adjustment status of target
pressure. After flashing for 5 seconds, the constantly bright
numbers indicate the real-time pressure.
Under the power-on mode, short press the "lighting
button" to turn on or off the lighting burner.
Poke the "unit adjustment knob" to switch between
bar/psi/kPa units.
After adjusting the preset mode, short press the
"control push knob" to start inflation;
During the inflation, the real-time pressure change is
digitally displayed.
During the inflation, short press the "control push
knob" to suspend inflation;
When the air pressure reaches the preset pressure
value, the inflation will automatically stop.
11
Publicidad
