Tesla IR400GP Manual De Instrucciones página 4

ANTI DRIP
1. Anti-drip system, which is designed to prevent water
escaping from the soleplate when the iron is too cold
automatically.
2. During use, the anti drip system may emit a loud clicking
sound, particularly during heat-up or whilst cooling down.
This is perfectly normal and indicates that the system is
functioning correctly.
ANTI SCALE
The build-in anti-scale cartridge is designed to reduce the
build-up of limescale which occurs during steam ironing.
Temperature and steam settings table
Instructions on Label
CLEANING AND MAINTENANCE
Before cleaning, remove the plug from the socket and allow the iron to cool down sufficiently.
1. Wipe off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner.
2. If the fiber is adhered to the soleplate, use a damp cloth with vinegar to wipe off the soleplate.
3. Never use strong acid or alkali in order to avoid damaging the soleplate.
4. If the scale blocks the steam hole, please remove the scale with toothpick; do not damage the surface of soleplate.
5. Stand the iron on its end and let it cool down sufficiently, and meantime pour any remaining water out of the box, set
the steam knob to position "O".
4
Caution:
This will prolong the working life of your iron. However,
please note that the anti-scale cartridge will not completely
stop the natural process of limescale build-up.
AUTO SHUT OFF
• If the appliance is hold stationary for 30 seconds while in
horizontal position, it will be automatically turned off.
• If the appliance is hold stationary for 30 seconds while
in a leaned (right or left) position, it will be automatically
turned off.
• If the appliance is hold stationary for 8 minutes while in
upright position, it will be automatically turned off.
Indicates that the fabric is not ironing
Type of Fabric
Nylon
Silk
Wool
Cotton
Linen, jeans
Thermostat Dial
MIN
MAX