Simplified declaration of conformity
Intenso International hereby declares that the radio equipment type Intenso Buds T300A/T302A com-
plies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the
following internet address: www.intenso.eu.
SCOPE OF DELIVERY
1
Intenso Buds black / white (2x)
2
Eartips in 3 different sizes
3
Charging case
Please check whether the contents of this package are complete and undamaged. If this is not the
case, please contact the seller or our service department: rma@intenso-international.de
User guidelines
Product overview
1 - Status LEDs
2 - Touch sensor
3 - Bud L
4 - Bud R
5 - USB-C input
Battery
Both the charging box and buds have integrated batteries. Fully charge these prior to using the pro-
duct for the first time. Charging the buds in the charging box takes approx. 2 hours and starts automa-
tically after placing the buds in the box. Charging the charging box also takes approx. 2 hours. Simply
connect the USB-A connector of the supplied USB-A to USB-C cable to a suitable power source (5V
1A) and the USB-C end to the charging box (USB-C In). The 4 LEDs light up during the charging process.
Each LED equates to 25% charging capacity. When 25% capacity is reached, the first LED remains
illuminated and the next LED flashes, at 50% the first two are permanently illuminated, at 75% the
first three and at 100% all 4 LEDs remain illuminated.
2
1
3
4
EN - Page 4 of 9
4
USB-A to USB-C cable
5
User manual
5
1