MTD 490-900-0067 Manual De Instrucciones página 8

Assembling the Universal Sun
Shade
1. Unfold sun shade by flipping the sun
shade up, and locking the support
in place.
2. Pull sun shade horizontally to
expand. Lock mechanism on the
underside of the sun shade as shown
in Figure 3-12.
Figure 3-12
3. Rotate the bottom half of the upright
supports and lock into place as
shown in Figure 3-13.
Figure 3-13
4. Fasten velcro straps to secure sun
shade to frame as shown in Figure
3-14.
8 S 3— A
ection SSembly
Attaching Sun Shade to Support
1. Slide the upright poles of the sun
shade frame into the support
mounted on the tractor. See Figure
3-15.
2. The frame pieces connect with a
spring clip inserted into the hole of
the connecting part to secure each
piece in place. Press down on the
spring clip button and slide it inside
the connecting piece until it snaps
into the hole. See Figure 3-16.
& S -U
et p
Figure 3-14
Figure 3-15
Figure 3-16