My First Fone R1c Manual Del Usuario página 7

the frequency of the location updates. myFirst Fone is rated for up to
24 working hours in standby mode.
Q: Are there any age requirements to use the myFirst Fone?
A: There are no age requirements, but the device is best suited to
children between 6 to 12 years old.
Q: Are the materials that myFirst Fone made from safe?
A: All the materials used in the myFirst Fone production comply with
European standards.
Q: Can myFirst Fone harm my child's health with radiation?
A: The myFirst Fone cell module's radiation level is much lower than
the limit set by the European standard.
Q: Is myFirst Fone waterproof?
A: myFirst Fone is protected from sweat, drips of water, rain and can
be briefly submerged into the water to a depth of up to 1 meter,
however the device should be removed before swimming or taking a
shower.
Q: Is connection to the Internet required for the geo-positioning
function to work?
A: Connection to the Internet is required to send the location data.
Remarks
• GPS: Accuracy of location may be a ected by network coverage,
atmospheric factors and signal strength.
• The manufacturer holds the right to change the construction,
including accessories and contents of the box, or the manufacturing
technique without any notice in order to improve any properties of
the device, given that this does not void any quality standards and
laws of the country of manufacturing/ transit/sale.
• Do not let small children and pets to play with myFirst Fone R1s. The
device contains small parts, which can cause harm.
• In case of submersion, remove the device from the water
immediately, switch it o and clean with a dry cloth. Do not
submerge the device into salt water.
• Do not wear the watch for swimming and bathing.
• Water resistance isn't a permanent condition and may diminish over
time.
• Staying indoors, atmospheric conditions, as well as other signal
distortion sources can harm the GPS tracking accuracy.
• Keep away from fire and high temperatures.
• Do not allow dust or dirt to enter the device.
• Do not drop or hit the device. Careless handling can lead to
damage of the integrated board and mechanical parts.
• Charger output must be: 5V 1A.
2