Publicidad
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. High-voltage indicator
2. Charge indicator
3. Charging base
4. Operating switch
5. Automatic mode
6. Switch-off
7. Manual mode
8. High-voltage button
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
-
Mosquito killer racket ByeFly 1000 Paddle
-
Base
-
USB cable
-
Instruction manual
3. OPERATION
Charging the appliance
-
Charge the racket for 4-6 hours before first use.
-
For charging, use a 5 V type-C charger. After plugging it into the power socket, the charge
indicator will light up red and turn green once charge is complete.
30
BYEFLY 1000 PADDLE
Manual mode
-
Turn the operating switch to the Manual mode position ( ) and hold down the high-voltage
button. The high-voltage indicator will light up.
-
The grille of the electric mosquito killer racket runs on high voltage. Flies or mosquitoes
will be electrocuted immediately upon contact with the grille. The high-voltage indicator
will switch off after releasing the high-voltage button, although there will still be residual
current on the grille. Do not touch the grille: the current will disappear after a few seconds.
-
Move the product switch to the "O" position to turn the product off.
Automatic mode
-
Move the operating switch to the Automatic mode position ( ): the mosquito-attracting
light will turn on, and the high-voltage indicator will light up.
-
Place the electric mosquito killer racket on the base. This mode can also be enabled for use
without the base. When mosquitoes are attracted to the mosquito-attracting light, they
are immediately electrocuted upon contact with the electrified grille.
-
Move the product switch to the "O" position to turn the product off.
4. CLEANING AND MAINTENANCE
-
Make sure that the appliance is not plugged to a mains socket and that the operating
switch is in the "O" position.
-
Do not use towels to clean or wash the grille with water to remove any insects left on the
grille surface. Use a soft, long-haired brush or shake the electric anti-mosquito racket to
remove the dead insects.
-
Do not use abrasive or aggressive products to clean the racket.
-
Dead insects can short-circuit the metal grille and damage the appliance if not properly
removed. Clean the product after every use.
5. TECHNICAL SPECIFICATIONS
Product reference: 01787
Product: ByeFly 1000 Paddle
Input:
5 V, 500 mA
Battery:
3.7 V, 1200 mAh
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
ENGLISH
31
BYEFLY 1000 PADDLE
Publicidad
