Joyello JL-971 PESAMORE Manual Del Usuario página 7

SPECIFICATIONS
- Equipped with a high precision "stain-gauge" sensor and high capability CPU to ensure the
weighing accuracy.
- Tare function.
- Auto power off
- Show low voltage
- Capacity: 20KG – Division : 10g
- Unit: KG/LB/ST
- Battery: 2pcs AAA Battery (test batteries are included)
- Work temperature: 0°C- 40°C
- Display usage: LCD Show, 3 units
Operation use conditions:Room temperature:
from 10°C to 40°C. Relative humidity: from 30% to 75% without condensation. Pressure:
from 700 – 1060 hPa.
Environmental transportation and storage conditions:
Temperature: from 10 to 40°C. Humidity: from 5 to 95%. Pressure: from 700 – 1060 hPa.
KEY FUNCTION
- ON/OFF/TARE key: Power on, Power off, Power tare
- UNIT key: select the measuring unit for kg/lb/st.
OPERATION
- Take out the scale, and open up the battery cover, install the batteries to the battery case.
- Put the scale on a flat table, and ensure it steady.
WEIGHTING STEP
1- Under the state press the key of "ON/OFF/TARE" to power on, the scale will be zero
"0.00" appear on the display after 2 seconds.
2- Press the UNIT key, you can change "kg", "lb","st".
3- Under the weight state, put the baby on the scale, LCD will show the weight of baby.
4- Press the key of "ON/OFF/TARE", LCD shows "TARE". Clear the weight of the container,
then put the baby into container, the weight will appear on the display.
5- Press the key of "ON/OFF/TARE" again , power off.
ERROR DISPLAY INTRODUCTION
When the scale is over loaded, the "EEEE" will appear on the display.
When the screen shows " LO", it means that the power isn't enough, please change the
batteries as soon as possible. The supplied batteries are for trial use only and they may have
a shorter life.
ADVICE FOR USE AND CARE
Put the scale on a clean and flat table.
7