Craftsman 917.379601 Manual De Instrucciones página 18

TROUBLESHOOTING CHART
PROBLEM CAUSE CORRECTION
Grass catcher 1, Cutting height too low. 1, Raise cutting height.
rlotflll|ng (ifso 2. Lift on blade worn off. 2. Replace blade.
i_lulpped ) 3. Catcher not venting air. 3. Clean grass catcher,
Hard to push 1, Grass is toe high or wheel 1. Raise cutting height.
height is too low,
2. Rear of lawn mower 2. Raise rear of lawn mower
housing or cutting blade housing one (1) setting
dragging in grass, higher.
3. Grass catcher too full. 3. Empty grass catcher.
4. Handle height position not 4. Adjust handle height to
dghtfor you. suit,
18