Bosch HWD57 Manual De Instrucciones página 5

Installation
Before you Begin
Tools and Parts Needed
• T-20 star head screwdriver
• Measuring tape
• Drill with bit (1/6")
Parts Included
• T-20 star head screws, #8x1/2" (6)
General Information
Flush Installation
Top view
¾" (I 9) I (622)24!A"
¾" (19) Flush inset
reveal reveal [// depth
cleats cleats 4_ •
Side view
reveal cleats (25)
_'_l 99/16"
I'll / Flush
Ill /
cut-out
_ height
4
24½"
(622)
measurements in inches (mm)
Power Requirements and Grounding
Circuit Specifications: 120V, 15A, 60Hz
The outlet must be properly grounded in accordance with
all applicable codes.
Installation Dimensions
Instructions are based on standard (in the U.S.A.) cabinets
36" (914 mm) high and 24" (609 mm) deep with a 25" (635
mm) countertop. If using non-standard cabinets, alter
dimensions accordingly.
30" Warming Drawer
Unit and Cabinet Dimensions
Cabinet opening bottom must be able to support
110 pounds (50 kg).
/.._'283/16 -
231/2"
(597)
--\
43/4,,_38 ''
(121.-964
>% 1
Measurements in inches (mm)
27" Warming Drawer
Unit and Cabinet Dimensions
Cabinet opening bottom must be able to support
110 pounds (50 kg).
//'_253/16 ''
231/2"
(597)
\
_p---
4 /4"- 38"
(121.-96z
Measurements in inches (mm)
Flush Installation
Top view
¾" (19) ¾" (19)I
reveal reveal
I/
cleats cleats _
1_25½" (648) _1
27" (686)
24½"
(622)
Flush inset
depth
Side view
reveal cleats (25)
......... !,11 /(248)
FII /flush
I 11 / cutout
.......... 4JJ _height
24½"
622)
measurements in inches (mm)
English 3