ARDES ARZANSC02 Instrucciones Para El Uso página 18

Battery charging
- Set the selector (4) to OFF;
- connect the USB cable (2) to the USB socket of the racket (3);
- Connect the other connector of the USB cable to the
detachable supply unit (1).
- Connect the detachable supply unit (1) to the mains.
While charging, the charging led (6) will be red.
When charging is complete, the charging led (6) will be green.
Full charging time: 3-5 hours.
When charging is complete, disconnect the detachable supply unit
(1) from the mains and disconnect the USB cable (2).
Using as racket
Adjust the selector swtich (4) to set the following operating modes:
OFF
To use the racket:
- Set the selector switch (4) to "Racket ON" position;
- To activate the grid (9), press the Grid Activation Buttons
(5) together, the "Grid ON" LED (7) will be lights on in green
colour to indicate the the grid is activated.
- When an insect passes through the grid, it will be subjected to
an electric discharge.
- Release the Grid Activation Buttons (5);
- After using, set the selector switch (4) to OFF.
(EN) INSTRUCTIONS FOR USE
Racket ON
18 / 56
Racket ON + light
for night use