rinses the panels which means there will be less
limescale on the panels compared to tap water.
When cleaning solar panels turn off the
solar panels fully. Avoid contact with
cables.
4. Never drag the ball valve or the soap dispenser
over the floor.
5. CLEANING & MAINTENANCE
Protect the product against frost.
• Store the wash brush in a dry and frost-free en-
vironment. Keep the brush head off the ground.
Do not store in direct sunlight. This will ensure
that the brush hairs will stay intact.
• Clean the telescopic pole with a slightly damp,
lint-free cloth before retracting the telescopic
pole. This prevents scratches.
• The screws in the closure clips can be tightened
or loosened using an Allen key. Do not tighten
the screws too tight, this may result in damage
to the closure clips.
• After using detergents in the soap dispenser,
rinse both the water hose and the soap dispens-
er thoroughly.
• Grease the O-ring in the soap dispenser regular-
ly to prevent drying out.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or
improperly maintained;
• Non-original spare parts have been used.
WWW.VONROC.COM
This constitutes the sole warranty made by compa-
ny either expressed or implied. There are no other
warranties expressed or implied which extend
beyond the face hereof, herein, including the im-
plied warranties of merchantability and fitness for
a particular purpose. In no event shall VONROC be
liable for any incidental or consequential damages.
The dealers remedies shall be limited to repair or
replacement of nonconforming units or parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
EN
5