Squire STRAPLOK COMBI 10 Instrucciones De Uso página 2

UK
How to set your own code
Dial
STEP 1
Set the lock by
aligning the
combination number
to the factory preset
combination 0-0-0
with the Guide Line.
(Figure 1)
+44 (0)1902 308052
Hilton Cross Business Park, Featherstone, Wolverhampton, WV10 7QZ, England
STEP 2
Rotate the Reset
Button 150 degrees
counter clockwise to
the reset condition
(Figure 2)
info@henry-squire.co.uk
Henry Squire & Sons Limited
STEP 3
Set your desired
combination
(Figure 3)
www.squirelocks.co.uk
STEP 4
Rotate the Reset
Button 150 degrees
clockwise to it's
original position.
Verify your new
combination before
using the lock. Then
your lock is ready to
use (Figure 4)