Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL OVERVIEW OF THE THERMOSTAT DISPLAY
LIGHT INDICATORS:
1. Display showing temperature and control parameters.
2. The red light is on when the heater is opera�ng.
3. Green light showing a reduced temperature. It is on
when the heater is opera�ng in accordance with the
chosen program, maintaining the reduced temperature.
(See Addi�onal func�ons).
4. Green light indicator showing the "comfort"
temperature. It is on when the heater is opera�ng in
accor
dance with the chosen
"comfort" temperature. (See Addi�onal func�ons).
HOW TO OPERATE
The appliance is switched on or off by pressing the bu�on
first �me, it begins opera�ng at the default "comfort" temperature of 22°C; meanwhile, the blinking screen will show that a clock
�me has not yet been set (See Se�ng menu). The heater will maintain the temperature displayed on the screen if the user does not
select the desired program from the Program menu. You can create your own weekly hea�ng program (P1) or you can use the
exis�ng standard programs "Office" (P2) or "Home" (P3). The weekly programs determine when it will maintain the comfort
temperature (22°C) and when it will maintain the reduced temperature, which saves energy (17°C).
SETTING MENU
By pressing and holding
use the
bu�on to select the necessary se�ng or confirm
OK
Op�ons
td
Se�ng the �me of the heater
Set the day of the week by pressing
Set the hour: 0-23 and save by pressing
You will not be able to adjust other se�ngs un�l you set the �me and day of the week.
Pr
Adjustment of weekly hea�ng program
P1 will no�fy you that you are going to adjust the user program. Confirm this by pressing
adjust by using the
d3 – Wednesday, d4 – Thursday, d5 – Friday, d6 – Saturday, d7 – Sunday, and confirm your selec�on by pressing
<
and
temperature (green light above
return to the selec�on list of the desired day for further programming or �uit the se�ng menu by pressing
If you wish to ini�ate a weekly program, see chapter "Program menu". The last value used on the screen will be a�ributed to
the "comfort" temperature before the start of the programming.
Adjustment of "comfort" temperature
Co
Select the desired comfort temperature by pressing
rd
Se�ng a lower temperature
Select the desired "reduced" temperature by pressing
Func on detec ng an open window
OP
Select "On" or "oF" by pressing
The func�on of an open window detects if a window is open (i.e., it detects a rapid change in temperature in a short period of
�me). A�er the heater detects an open window, the hea�ng is automa�cally turned off and changed to an�-freezing mode by
maintaining a temperature of 7°C and „AF" is displayed. A�er the window is closed, i.e., when the temperature in the area
increases, the heater automa�cally turns the previous program on or maintains a permanent constant temperature.
C
Calibra�on of the temperature
The ambient temperature is displayed on the screen. If it does not correspond to the thermometer readings, then it may be
calibrated. For example, the heater shows that the ambient temperature is 20°C; meanwhile, the other thermometer shows
that it is 22°C. Then you can calibrate it and set the temperature which you have measured using the other thermometer.
AS
Adap��e start
Turn on ("On") or off ("oF") the adap�ve start by using the
the user at a specific �me. For example, if you want the temperature at 9 o'clock to be 22°C, the heater will determine when
it has to start hea�ng so that it reaches 22°C at the desired �me.
rE
Reset the heater to factory default se�ngs
Press
OK
10
DT
program, maintaining
the
bu�on for 3 seconds, the selec�on menu can be turned on or off. Use the
OK
+
<
<
and
bu�ons: 7d – 7 days, 5d – 5 business days, 2d – weekend, d1 – Monday, d2 – Tuesday,
<
bu�ons to change the hours from 00 to 23 and select the desired temperature for every hour:
<
is on),
+
or
and a�er the screen turns off, press and hold
sX.2
FUNCTIONS OF THE BUTTONS:
+
– Increases temperature, �me or
other parameter.
-
– Decreases temperature, �me or
other parameter.
<
– Selec�on bu�on meaning
<
– Selec�on bu�on meaning "more".
OK
– Confirma�on of selec�on.
on the right side of the heater. When the heater is switched on for the
your selec�on:
Descrip�on of func�on
-
: 1 – Monday; 2 – Tuesday, etc., and save by pressing
. Set the minutes: 0-59 and save by pressing
OK
+
a "comfort" temperature (green light above
-
+
and
. By pressing
-
+
and
. By pressing
-
. This func�on is turned off by default.
-
+
and
again un�l you see "00" on the screen a�er every shown segment.
OK
"less".
< <
bu�ons to scroll through the list and
.
OK
.
OK
. Select which day(s) you are going to
OK
<
is on). A�er pressing
, you will enter the se�ng menu.
OK
, you will enter the se�ng menu.
OK
bu�ons. This func�on reaches the temperature set by
GB
2021-02-23 art.no.: 62220
2022-01-19
. Use the
OK
-
a decreased
, you will
OK
for 3 seconds.
OK
Publicidad
