Publicidad
Enlaces rápidos
Q-BEA-1
Flip the module upside down.
Retournez le module à l'envers.
Hand-tighten the screws.
Serrez les vis à la main.
Retighten the 2 screws. Repeat for each leg.
Resserez les 2 vis. Répetez pour chaque patte.
PM LE BEAUMONT 12-19-2023_01
- LE BEAUMONT
- LE MONTREUIL
8x 400-1195
4x 140-1411
1/4"- 20 x 1"
Place the legs on the frame.
Déposez les pattes sur la structure.
2x
Fully screw the compression plate to the metal leg.
Vissez complètement la plaque de compression sur la patte de métal.
Put the module down and place the back cushion on it.
Retournez le module sur ses pattes et y placer les coussins.
www.tricafurniture.com
1x 400-1106
Allen key 4mm
Decorative leg on
the back side.
Patte décorative
du côté arrière.
2x
U.S. Patent No. 11,612,253 and other patents pending.
2x
Publicidad
Manuales relacionados para TRICA Q-BEA-1
Resumen de contenidos para TRICA Q-BEA-1
- Página 1 - LE BEAUMONT - LE MONTREUIL Q-BEA-1 8x 400-1195 1x 400-1106 4x 140-1411 1/4”- 20 x 1” Allen key 4mm Decorative leg on the back side. Patte décorative du côté arrière. Flip the module upside down. Place the legs on the frame.
- Página 2 The paint finishes and the normal wear and tear of the components for which TRICA cannot be held responsible. The directions listed above are only a few basic mentioned above are not covered under this warranty.