Publicidad
Idiomas disponibles
Idiomas disponibles
NEXT STEP MAY REQUIRE TO TRIM THE SUPPORT BAR
If the support bar is too long for your wall-to-wall opening "D", you will have
to trim it down. Below calculation is for reference only: Ensure you made all
the proper measurements before you cut the bar.
ONLY CUT THE BAR ON THE SIDE WITH NO HOLES!
(THE DOOR SIDE)
1. Measure the distance "D" at the height where the bar will be installed.
2. If D < 58 7/16 in, cut the bar to a total length of L = D - 7/8 in.
2
1
D
L
26 11/16 in
ONLY CUT THE BAR ON
L = D - 7/8 in
THE SIDE WITH NO HOLES!
(THE DOOR SIDE)
PAGE 13
Publicidad
